Product Overview

2 Faucet Jockey Box with 45 ft Stainless Steel Coils & SS Faucets - Duotight Fittings

This jockey box comes with a 48 quart insulated cooler, two 45.9 foot (14 m) stainless steel coils, two stainless steel front shanks, 2 stainless steel back shanks, 2 black plastic tap handles, and stainless steel faucets. This compact coil design is equipped with duotight fittings that allow you to easily connect and disconnect EVABarrier tubing. You will still need tail pieces, beer nuts, neoprene washers, and other parts to connect to your homebrew or commercial kegs.

For Commercial Brewery Kegs: To connect to a commercial sankey style keg, you will need 2 Jumper Lines and 2 sankey style couplers. Most American breweries use "D" system Sankey couplers. You can find our selection of D system couplers here:

For Homebrew Style Ball Lock Kegs: to connect to homebrew style ball lock kegs, you will need 2 Ball Lock Jumper Lines.

CO2 Dispensing: For dispensing with CO2, we recommend using a 5 LB CO2 Cylinder and Taprite Dual Gauge Regulator. For Homebrew style ball lock kegs, you will also need 2 ball lock gas disconnect, gas tubing (10 ft recommended), 5 hose clamps, and a 5/16" tee. For a Sankey style commercial brewery keg, you will also need gas tubing (10 ft recommended), 5 hose clamps, and a 5/16" tee.

Note: Faucets are moved for shipping. The jockey box fittings could come loose during shipping. We recommend you check all fittings to ensure a snug fit. Do not overtighten the beer nuts to the stainless steel coils. Overtightening the beer nuts will result in leaks.