Product Overview
Wort Chiller - Copper 3/8" x 50'
The jumbo premium immersion chiller made w/50 feet of 3/8" OD copper tubing. It is intended for batches over five gallons, but will chill a five gallon batch from boil to 75 degrees in 10 mins or less, depending on ground water temperature.
Directions For Use:Â Attach a garden hose to the brass garden hose fitting. Insert the wort chiller into your hot wort at the end of the boil. Place the other end of the clear tubing outside of your boiling pot. Turn on the water so that the water flows through the coils and exits the other end of the tubing. The water will cool the coils and should cool your wort within about 20 minutes.
Estimated Dimmensions:
- 12" Diameter
- 11.5" To the top coil
- 23.5" To the bend that goes over the kettle lip
California Consumers: Proposition 65 WARNING: This product contains chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, see our our Prop 65 Warning Page.
